Laser Tube Cutting Machine
Wide range of materials: laser cutting can be used for carbon steel cutting, stainless steel cutting, alloy steel cutting, aluminum and alloy material cutting, etc
Perforation, complex contour and long pipe machining can be realized through simple operation.
High cutting efficiency and mass production can be realized.
The incision is flat, without burr, with fine cutting seam and less material loss, which can save at least 15% ~ 30% material loss.
Non contact processing, and the heat affected zone of laser cutting is very small, almost no deformation.
The cutting accuracy is high, and the contour accuracy can reach ± 0.05mm.
Full automatic self centering pneumatic chuck.Welded bed, integrally cast aluminum beam, stable structure and accurate positioning.Professional cutting software to achieve high-precision processing of pipes.
With the non-stop improvement and maturity of laser era, in particular the fast improvement of nc laser decreasing machine tool in brand new years, it's miles extensively applied in sheet metallic, metallic form, car components, packaging and exclusive industries. cnc laser decreasing tool has apparent blessings: speedy cutting pace, accurate superb and excessive precision; the decreasing floor is simple and does no longer harm the workpiece; it is not laid low with the form of the workpiece and the hardness of the fabric to be reduce; easy operation, protection, strong performance, vast adaptability and flexibility.
Specification
Function&meter List | LT6-360 | LT6-230 | LT6-160 | |
●standard configuration, | ||||
○optional configuration, | ||||
×No configuration required | ||||
Item | Subitem | |||
Basic parameter | tube cross-sectional shape | Round,square,rectangular,oval,rounded rectangular,Angle steel,channel steel and other tubes | Round,square,rectangular,oval,rounded rectangular,Angle steel,channel steel and other tubes | Round,square,rectangular,oval,rounded rectangular,Angle steel,channel steel and other tubes |
tube size range | Round tube:φ20-φ360mm | Round tubeΦ20-Φ230mm | Round tubeΦ10-Φ160mm | |
Square tube:□20-□254mm | Square tube□20-□160mm | Square tube□10-□110mm | ||
Rectangulartube: | Rectangular tube: | Rectangular tube: | ||
300mm≥Side length≥20mm,Circumscribed circle diameter≤360mm | 170mm≥Side length≥20mm, | 110mm≥Side length≥20mm, | ||
Circumscribed circle diameter≤230mm | Circumscribed circle diameter≤160 mm | |||
Maximum machinable tube length | 6500mm | 6500mm | 6500mm | |
Quality cutting | Active collision prevention | ● | ● | ● |
Angle steel,channel steel cutting | ● | ● | ● | |
Performance | Requirements for tubes | Diameter<φ50mm thickness≥1mm; | Diameter<φ50mm thickness≥1.2mm; | Diameter<φ50mm thickness≥1.2mm; |
Diameter≥φ50mm | Diameter≥φ50mm | Diameter≥φ50mm | ||
The ratio of pipe wall to diameter of thin-walled pipe shall not be less than1/40 | The ratio of pipe wall to diameter of thin-walled pipe shall not be less than1/40 | The ratio of pipe wall to diameter of thin-walled pipe shall not be less than1/40 | ||
Wall thickness≥2.5%of Diameters of tubes | Wall thickness≥2.5%of Diameters of tubes | Wall thickness≥2.5%of Diameters of tubes | ||
wall thickness≥5mm | ||||
There is no such restriction for tubes with a wall thickness≥6mm | ||||
Maximum tube length | 3000mm | 4500mm | 4500mm | |
Shortest remaining material | 80mm | 70mm | 70mm | |
Dimensions | 13500×3500×2500mm | 13500×3200×2500mm | 13500×3200×2500mm | |
Maximum tube weight | 400Kg 61 kg/m | 200Kg 30Kg/m | 200Kg 30Kg/m | |
Overall weight | 7500kg | 6700kg | 6200kg | |
Optical system | Laser source | MAX/IPG/Raycus/GW | MAX/IPG/Raycus/GW | MAX/IPG/Raycus/GW |
laser head | BLT/Ray Tools/Ospri | BLT/Ray Tools/Ospri | BLT/Ray Tools/Ospri | |
mechanical system | Chuck drive types | Pneumatic chuck | Pneumatic chuck | Pneumatic chuck |
Standard blanking rack | ● | ● | ● | |
Linear Rails | Made in Taiwan | Made in Taiwan | Made in Taiwan | |
Rack | Made in Taiwan | Made in Taiwan | Made in Taiwan | |
Electrical system | X-axis、Y-axis、Z-axis、A-axis | France Schneider/Japan Yaskawa | France Schneider/Japan Yaskawa | France Schneider/Japan Yaskawa |
Servo motor and driver | ||||
Control system | FSCUT3000 | FSCUT3000 | FSCUT3000 | |
Proportional gas valve | Japan SMC/Germany AVENTICS | Japan SMC/Germany AVENTICS | Japan SMC/Germany AVENTICS | |
O2Cutting gas control valve | Japan SMC | Japan SMC | Japan SMC | |
N2Cutting gas control valve | Japan SMC | Japan SMC | Japan SMC | |
File format | ● | ● | ● | |
File format | IGS、DXF、G Code | IGS、DXF、G Code | IGS、DXF、G Code |